LED Tester | Christmas Light Tester - LISUN

Lisun engineer visited Bulgaria in the middle of MAY, 2017. In May, our engineer was too busy because there were many customers who purchased Lisun instruments to need installing and training. We already have added two new clients in Bulgaria in MAY. So our engineer visited Bulgaria to installing and training for the two clients. The clients had purchase LSG-1700B Rotation Luminaire Goniophotometer, LPCE-2 Spetroradiometer Sphere System, LSRF-2 Lamp Start, Run-up Time and Flicker Test etc. In the visiting trip, Our engineer got feedbacks from the clients that they were satisfied with Lisun Products, and our engineer depended on their professional technical and fluently English to earned plaudits from our customer sides. Here are some picture from our clients sides as below: Figure 1: LPCE-2 Spetroradiometer Sphere System Figure 2: LSG-1700B Rotation Luminaire Goniophotometer Figure 3: LSG-1700B Rotation Luminaire Goniophotometer Figure 4: Integrating Sphere with Holder Base

The quality of LED driver will influence the life of LED lamp directly. Therefore, we need to control the quality of LED driver strictly. According to IEC62384-2011 and GB/T 24825-2009 DC OR AC SUPPLIED ELECTRONIC CONTROL GEAR FOR LED MODULES – PERFORMANCE REQUIREMENTS. The control gear shall be subjected to a temperature cycling shock test and a supply voltage switching test as follows: a. Temperature cycling shock test The non-energised control gear shall be shored firstly at -10C or if the control gear is marked with a lower value, at that value for 1h. The control gear is then moved into a cabinet having a temperature of Tc and stored for 1h. Five such temperature cycles shall be carried out. b. Supply voltage switching test At rated supply voltage the control gear shall be switched on and off for 30s. The cycling shall be repeated 200 times with no load and 800 times with maximum load conditions. LED modules failing during this test shall be replaced immediately. At the end o...

This Algeria client built a new big lab not long ago. They ordered all the test instruments from Lisun Group. Lisun sent two engineers to help them for the installation and training. Here are some photos to share with you. Group photo with our clients: [caption id="" align="aligncenter" width="600"] Algeria National Lab Ordered Whole Lighting Test Systems from Lisun Group[/caption] [caption id="" align="aligncenter" width="600"] Algeria National Lab Ordered Whole Lighting Test Systems from Lisun Group[/caption] [caption id="" align="aligncenter" width="600"] Algeria National Lab Ordered Whole Lighting Test Systems from Lisun Group[/caption] [caption id="" align="aligncenter" width="600"] Algeria National Lab Ordered Whole Lighting Test Systems from Lisun Group[/caption] LPCE-1 LMS-5000 spectrophotometer and integrating sphere system: [caption id="" alig...

High/Low temperature & humidity test chamber is used to simulate a actual temperature and humidity environment which it may caused any influence for surrounding objects，due to electronic products widely application in various occasions, in order to design better product which meet relevant environmental standards, the temperature and humidity test has become an necessary test items, and high/low temperature and humidity test chamber widely used in many different industries such as aerospace product, electronic instrumentation, materials, electronic products and various electronic components, this environmental test chamber used to checking working performance of DUT in high temperature, low temperature or hot and humid environment. This article focuses on discussion environmental climatic chamber application on the LED lighting industry application. Lisun Electronics (Shanghai) Co., Ltd is one of best LED lighting test equipment supplier, our products involved photometric, co...

LISUN engineer visit Croatia to install and train goniophotometer. A customer in Croatia bought a LSG-1800BCCD goniophotometer in LISUN. As soon as they received the goniophotometer in May, we arranged engineer to install and train to there. And LISUN is praised “Nice Service” here. The installation and training went very well: In the whole process of the installation, LISUN engineer communicated with customers through English （All members in LISUN can speak English fluently）. Firstly, according to the English manual provided by LISUN, the engineer and staff completed the installation of the test system together. And then, LISUN engineer trained them how to operate the test equipment patiently. Lastly, LISUN engineer practiced the test operation with staff together. Here we share several pictures with you:   Picture 1: Engineers and customers in the lab Picture 2: Engineers and customers in the office Lisun Group is Lead in CFL and LED Test Instruments. Ou...

Europe Installation and Training Mission in November Lisun engineer visited four Europe customers this time, two Spain customers, one UK customer and one Germany customer. The first Spain customer purchased EMI-9KB EMI Receiver System, LSG-1800B High Precision Rotation Luminaires Goniophotometer and LPCE-2(LMS-9000A) High Precision CCD Spectroradiometer & IS-2.0MT Constant Temperature Integrating Sphere System. The below is some training photos: Picture 1: IS-2.0MT Constant Temperature Integrating Sphere Picture 2: LSG-1700B High Precision Rotation Luminaires Goniophotometer Picture 3: The second Spain customer purchased LPCE-2(LMS-9000A) High Precision CCD Spectroradiometer & IS-2.0MA Integrating Sphere System Picture 4: The second Spain customer purchased LSG-1700B High Precision Rotation Luminaires Goniophotometer Picture 5: The Germany customer purchased LSG-1800BCCD High Precision Rotation Luminaires Goniospectroradiometer Picture 6: The UK customer purchased LSG-1800B Hig...

DOMF61000-10 damped oscillatory wave immunity tester included powerful host and high performance damped oscillation modules, it's designed for to do damping immunity test of electronic products and fully meet IEC 61000-4-10, EN61000-4-10 and GB/T 17626.10 standards about slow damped oscillatory wave requirement. Main characteristics: • Application imported electronic switches, high performance and smooth waveform; • Built-in 3phases/5wires CDN(coupling and decoupling network); • Included Windows control software and operation, automatic generate test report; • Adopted with modular structure design, it is easy to do maintenance and upgrade; • Big colorful LCD touch screen, built-in IEC standard test levels; Technical Specifications: Output Voltage 0～3000V Oscillation Frequency 100kHz, 1MHz Pulse Polarity Positive, Negative or Positive/Negative automatic Internal Resistance 200Ω Rise Time 75ns±20% Attenuation Attenuation to half value of firs...

Introduction: IMF61000-9 impulse magnetic field immunity tester is high performance test instrument which special designed for to do impulse magnetic field immunity test and fully meet IEC61000-4-9, EN61000-4-9 and GB/T17626.9 standards, also it come with high intelligent, high stable performance and easy operation characteristics. Main characteristics: • Application imported programmable high voltage power supply, high performance and intelligent control; • Included software and can remote control via RS232 communicate port; • Adopted with modular structure design, it is easy to do maintenance and upgrade; • Adopted with big colorful LCD touch screen, built-in IEC standard test levels; Technical Specifications: Pulse Magnetic Field Output Waveform voltage waveform: 1.2/50μs; current waveform: 6.4/16μs Magnetic Field Strength 0A/m~3000A/m Rise Time 6.4μs±30% Duration Time 16μs±30% Combined Wave Output Impedance 2Ω±0.25...

Test Post from CFL and LED Tester,Light Measurement http://www.lisungroup.com

hhhhhhh

Intelligent Lighting is the distributed lighting control system by using internet of things technology, wired/wireless communication technology, power line carrier communication technology, and embedded computer intelligent information process and energy-saving control technology to realize the intelligent control of lighting equipment. Shanghai launched a pilot project of the first road intelligent poles in Oct, 2015, which can achieve WIFI internet, reserve parking and call center personnel for video calls and other functions. WIFI device on the poles can fully cover the road network, the public can use WIFI to connect internet and enjoy the surfing convenience experience. The public can make an appointment via the mobile terminal and charge at the designated parking space to alleviate the current status of insufficient city charge piles. High-definition network dome connects with the outdoor radio, voice intercom equipment; the public can make video calls with help center personnel ...

Lisun LMS-6000 Portable color spectroradiometer is the only one used telephoto optical system in portable spectrometer illuminance meter, spectral resolution is 0.2nm, which can measure LED wide spectral light source and also can measure CFL, HID narrow spectral light source.   It can be calibrated automatically by itself. Do not worry that the dark background changed affects the measurement results. Minimum integration time can be 50us, which can measure stronger optical signal. With automatic zero calibration and zero compensation technology, the maximum integration time can be longer and it can measure weaker optical signal.   Lisun launches two models currently: LMS-6000 and LMS-6000P.   LMS-6000 can measure the light wavelength range from 380 to 780nm, illuminance E(lx), Candlelight E(fe), CCT(K), Duv, Coordinate x,y, Coordinate u,v, Coordinate u’,v’, SDCM, CRI, R1~R15, Irradiance Ee(W/m2), S/P, Dominant(nm), purity(%), half width(nm), Peak wavelength(nm)...

What is TM30? IES TM-30-15 is a document approved by the Illuminating Engineering Society (IES) that describes a method for evaluating light source color rendition. The method encompasses several individual measures and graphics that complement one another and provide a comprehensive characterization of how the light will affect the color appearance of objects. The three highest-level components of the system are the Fidelity Index (Rf), Gamut Index (Rg), and Color Vector Graphic. Why was TM-30 developed? The existing color rendering metric widely used in the lighting industry, the International Commission on Illumination’s (CIE’s) General Color Rendering Index Ra (commonly called CRI), was developed more than 50 years ago, and has been unchanged in the last 40. Although it has served a vital purpose, its limitations are widely recognized, including by the CIE. The CIE has been working on a replacement or alternative for more than 25 years, and many researchers have develope...